S 501 B + ST 170

S 501 B: Stainless steel construction. The chamber has 2 stainless steel sealing bars front 740 mm right
455 mm. Sealing with airpressure support. Cut-off sealing separately adjustable. The machine is complete
with high efficiency vacuum pump 100 cbm/h, user friendly control board, automatic lid movement, conveyor
with height adjustment, vacuum controlled by sensor and vacuum stop button.
Following options are possible: gas flushing, bi-active sealing, footswitch, vacuum pump 160 cbm/h.

:: Example of use (movie)
:: Catalogue (PDF)

Technical detail S 501 B:

Chamber size (w x l x h/mm):		895 x 565 x 230
Usable chamber hight (mm):		160
Sealing length (mm):		1 x 455 + 1 x 740
Distance x (y) (mm):		765 (480)
Vacuum pump (cbm/h):		160 (250)
Power connection (v/ph/Hz):		400/3+N+PE/50Hz
Power (kW):		5,5 (7,5)
Compressed air (l/min):		50 at 6 Bar
Maximum bag (mm):		450 x 800
Outer dimensions (w x l x h/mm):		975 x 755 x 1170
Weight (kg):		approx. 380 (500)

Option

Gas flushing for soft products
Vacuumpump 160 cbm/h
Bi-active sealing

Technical detail ST 170:

Working area (w x l/mm):		820 x 450
Dipping depth (mm):		100/150/200
Water volume (l):		140
Maximum Product weight (kg):		50
Power connection (v/ph/Hz):		400/3+N+PE/50Hz
Power (kW):		37
Safeguarding (Amp.):		63
Compressed air (l/min):		25 bei 6 Bar
Outer dimensions (w x l x h/mm):		950 x 890 x 1500
Heater Power (kW):		36
Weight (kg):		265

ST 170: stainless steel construction. The automatic transport of the product in and out of the shrink tunnel
is controlled by a photocell.

Water temperature is adjusted with a thermostat.
Automatic water level regulation.
Steam exhaust release through the lid.
Dipping time and dipping depth of water, also time for water to drip from product is adjustable.
Slight on left side
Pneumatic dipping cylinder
Automatic filling of water
User friendly construction, easy cleaning.
Use of machine without dipping process is possible.
Manual dipping is possible.
Heating power 36 kW
Dipping platform 820 x 450 mm

Katergori: Vakummaskin

Description

:: Example of use (movie)
:: Catalogue (PDF)

Technical detail S 501 B:

Chamber size (w x l x h/mm):		895 x 565 x 230
Usable chamber hight (mm):		160
Sealing length (mm):		1 x 455 + 1 x 740
Distance x (y) (mm):		765 (480)
Vacuum pump (cbm/h):		160 (250)
Power connection (v/ph/Hz):		400/3+N+PE/50Hz
Power (kW):		5,5 (7,5)
Compressed air (l/min):		50 at 6 Bar
Maximum bag (mm):		450 x 800
Outer dimensions (w x l x h/mm):		975 x 755 x 1170
Weight (kg):		approx. 380 (500)

Option

Gas flushing for soft products
Vacuumpump 160 cbm/h
Bi-active sealing

Technical detail ST 170:

Working area (w x l/mm):		820 x 450
Dipping depth (mm):		100/150/200
Water volume (l):		140
Maximum Product weight (kg):		50
Power connection (v/ph/Hz):		400/3+N+PE/50Hz
Power (kW):		37
Safeguarding (Amp.):		63
Compressed air (l/min):		25 bei 6 Bar
Outer dimensions (w x l x h/mm):		950 x 890 x 1500
Heater Power (kW):		36
Weight (kg):		265

ST 170: stainless steel construction. The automatic transport of the product in and out of the shrink tunnel
is controlled by a photocell.

Water temperature is adjusted with a thermostat.
Automatic water level regulation.
Steam exhaust release through the lid.
Dipping time and dipping depth of water, also time for water to drip from product is adjustable.
Slight on left side
Pneumatic dipping cylinder
Automatic filling of water
User friendly construction, easy cleaning.
Use of machine without dipping process is possible.
Manual dipping is possible.
Heating power 36 kW
Dipping platform 820 x 450 mm